View HMSA3057A_311935.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NEW
MS type Lower Profile Plug
H/MS Series Circular connector conforming to MIL-C-5015
PAT.P
Connector Height Comparison 18-10 Size
50.1mm
45.5mm
3057-10
70mm
54.5mm
Existing MS Connector
Lower-profile Plug
22-22 Size
48.2mm 53.2mm
sFeatures
1. 20% Height Reduction
When compared with existing H/MS Series connectors the overall height of plug assemblies is lower, allowing it to be used in space constrained applications.
78.7mm
41mm
3057-12
60.7mm
2. Cable Exit in 360 Directions
The cable can exit in any of the 8 fixed direction, in 45 increments.
Existing MS Connector
Lower-profile Plug
3. Simple Assembly
The 2-piece design consisting of the contact/insulator assembly and the back-shell assembly allows termination without the use of any specialized tools.
Cable Exit Direction of 360
4. Water and Dust Protection
IP 67 rating when fully terminated and mated with corresponding part.
5. TUV Certification
Provided with a protective circuit function for TUV certification. The (D) pin is directly connected to the outside metal case.
sApplications
Factory automation equipment, robotic equipment, servo motors, and a wide variety of industrial and measuring instruments.
Plug
(45
)
Can be changed in 45 degree increments
45.8mm
63.8mm
56.5mm
18 22
3057-10
3057-12
2004.6
1
sProduct Specifications
Voltage rating 250VAC, 250V DC (pollution degree: 3, overvoltage category: 3) 500V AC, 500V DC (pollution degree: 2, overvoltage category: 2) Current rating 23A Max. (18-10 size) 46A Max. (22-22 size) Operating temperature range -25c to +125c Storage temperature range -25c to +125c
Rating
Item
Specification 18-10 size 22-22 size
Conditions
1A DC 500 V DC 2250V AC/one minute. Frequency: 10 to 500 Hz, single amplitude of 0.75 mm, acceleration of 98 m/s2 for 3 hours in 3 axis. Acceleration of 490 m/s2, 11ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis.
1. Contact resistance 3 m ohms max. 1 m ohms max. 2. Insulation resistance 5000 M ohms min. 3. Withstanding voltage No flashover or insulation breakdown. 4. Vibration No electrical discontinuity for 10 ms max. 5. Shock
Contact resistance: Contact resistance: 6. Durability 500 cycles 4.5 m ohms max. 1.5 m ohms max. (insertion/ withdrawal) Temperature: -55c Room temperature to +125c Room temperature Time: 30 10 to 15 30 10 to 15 (Minutes) 7. Temperature cycle Insulation resistance: 5000 M ohms min. 5 cycles. Insulation resistance: 50 M ohms min. (Humidity state) 96 hours at temperature of 71c and humidity of 95% . 8. Humidity 500 M ohms min. (Dry state) No dust penetration. 9. Water/dust When mated with corresponding connector. No water penetration when submerged for 0.5 hour at the depth of 1 meter. protection
sMaterials
Item
Body Insulator Socket Contacts Gasket Bushing
Material
Aluminum alloy PPS Copper alloy Silicone Rubber Chloroprene rubber
Finish
Black chromate Color: Black Silver plating Color: Black Color: Black
Remarks
------------------UL94V-0 -------------------------------------------------------
sAdditional Product Information
1. Product number suffixes
(10) Supplied with a wire hole in the locking ring (to prevent loosening of the ring). (11) Supplied without the wire hole in the locking ring.
2. Corresponding receptacles.
18-10 Size: Part number H/MS3102A18-10P-D-T1(10) 22-22 Size: Part number H/MS3102A22-22P-D-T(10)
2
sPlug
H/MS08A18-10S-DT10D(10)
41
A
O33.5
D
B
18-10S
C
X
45.5
Part Number
H/MS08A18-10S-DT10D(10) H/MS08A18-10S-DT10D(11) H/MS08A18-10S-DT10D1(10) H/MS08A18-10S-DT10D1(11)
CL No.
120-0476-3-10 120-0476-3-11 120-0481-3-10 120-0481-3-10
Number of Contacts
Weight
4
89g O10~O12.5mm
H/MS08A18-10S-DT10C(10)
O33.5
35.5
Part Number
H/MS08A18-10S-DT10C(10) H/MS08A18-10S-DT10C(11)
CL No.
120-0480-0-10 120-0480-0-11
Number of Contacts
4
Weight
77.6g
H/MS08A22-22S-DT12D(10)
A D
O39.5
53.2
Part Number
H/MS08A22-22S-DT12D(10) H/MS08A22-22S-DT12D(11) H/MS08A22-22S-DT12D1(10) H/MS08A22-22S-DT12D1(11)
CL No.
120-0477-6-10 120-0477-6-11 120-0482-6-10 120-0482-6-11
Number of Contacts
Weight
4
127g O10~O13.5mm
3057-10
31
Shown one type.
Applicable Cable Diameter Contact solder pot inner diameter
O12~O14.3mm 2.5mm
41
A
D
B
18-10S
C
X
O30
Shown one type.
Applicable Cable Diameter Contact solder pot inner diameter
O13~O14.3mm 2.5mm
45.8
22-22S
X
B
C
3057-12
36
Shown one type.
Applicable Cable Diameter Contact solder pot inner diameter
O13~O15.9mm 4.5mm
3
BAssembly Procedures
Process Outline of assembly
B B A
Pre-solder Conductor portion A Contacts Back-shell
B
Solder
Bushing
1
Insulator/contact assembly Washer
A
18-10 Size 22-22 Size 24mm 33mm
B
13mm 15mm
Strain relief clamp
a. Pass the strain relief clamp, washer, bushing, and hood over the cable, in this order. b. Prepare the cable and conductors per the dimensions in Table 1. c. Bend the exposed conductor to the B dimension as indicated in Table 1. d. Pre-solder the exposed conductor and solder it as shown to the exposed contact. Note: Use care not to damage the conductor's insulation.
4.5 mm min.
Back-shell Set screw (Hexagonal hole opposite side 1.27 mm)
3057-10
Locking ring
2
Table 2
Locking Ring
3 to 3.5N * m
Cable Clamp
5 to 6N * m
a. Place over the contact/insulator assembly (in the following order:Back shell, bushing, washer, strain relief clamp). b. Tighten the Locking ring and Cable clamp to the torque values per Table 2. c. Tighten the set screw to a torque value of 0.3-0.4 N-m HRS recommended tool: PB205/1.27 (CL150-0066-3)or equivalent. d. Using screwdriver tighten the two strain relief clamp screws until both sides of the moveable part are in contact with the cable clamp.
(R)
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com
4
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
30
57
Table 1
-10
Cable
Strain relief clamp Screw Cable
Clamp Washer Bushing
This datasheet has been downloaded from: www..com Datasheets for electronic components.

▲Up To Search▲

Price & Availability of HMSA3057A

	To Download HMSA3057A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .